Overview
Shining 3D advocates for convenience and accuracy in our products. We provide different standards of electrical socket adapters and relay boxes to reduce the number of accessories and cables to facilitate customer use regardless of your location. This guide can help you quickly install the AoralScan 3 with several simple steps.
How to install the AoralScan 3 and the software?
STEP 1: Set the plug of the power adapter
Users can change the plug of the power adapter according to the regional requirements. We have quipped the power adapter with the plugs of CN, US, EN, AUS and EU.
If users want to remove the plug, please push the switch below the plug on the adapter, then pull the plug out.
STEP 2: Connect the relay box
1. Connect the scanner tail cable to the type B port (scanner port) of the relay box.
2. Connect the power adapter to the port (power port) marked with “12V” of the relay box. After connection with the power adapter, the tail lamp of the scanner will turn green.
3. Connect the PC and the relay box with the existing USB 3.0 data cable.
Tips: Please loosely coil the cable to avoid excessive bending and twisting of cables.
STEP 3: Set the scanner
1. Remove the dust cap and install the scanner tip on the scanner with a firm attachment.
2. Place the scanner on the cradle.
STEP 4: Install the software
1. Insert the flash driver in the USB 3.0 port of your PC.
2. Copy all files to your PC and launch the application “IntraoralScan”.
3. Select the language and installation path.
4. Agree with the agreement.
5. Click “One-click Installation”
6. Wait for installation.
7. Click the “Finish” to end the installation.
