AccuFab-D1 Projector Module Replacement


1.1 Turn off the power and push the platform to the top position. 

1.2 Remove the platform and the resin tank 

1.3 Open the back cover

1.4 Disconnect 6 cables marked in the image

1.5 Loose 4 screws on the frame

1.6 Take out the module

2.1 Put back the new projector module and connect all cables.

2.2 Redo the accuracy test for the new projector. 

Note: if you are using AccuWare as the slicing software, you can follow the accuracy-test wizard in it. 

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.