NOTE: This guide only applys to AccuFab-D1s. Do not try on other printers.
In order to add a new resin profile is necessary to obtain the admin permission in accuware software,
have a look at this video in order to proceed with the process:
Once obtained access to all the resin parameters is necessary to follow this procedure in order to install a specific firmware into the printer:
1. Download the update file and copy the compressed file(.zip) to the USB flash disk.
2. Start the machine, insert the USB flash disk, and click “About U Disk Update”
3. Select the file you want to update, click Confirm”, the machine will restart automatically
4. Tap the bottom of the screen, click “others Confirm”, then you can import the third party material to print now.
