Since each type of Shining3D resin has different material composition.
Which leads to the different cleaning method also post cure time.
On the following are the tips for them.
Material | Cleaning Tips | Post Cure（FabCure） |
DM11 | Manual cleaning with clean Alcohol(IPA) for 30 secs. Ultrasonic is NOT recommended | 10min |
DM12 | Manual cleaning with clean Alcohol(IPA) for 30 secs. Ultrasonic is NOT recommended | 5min |
SG01 | Ultrasonic with clean Alcohol(IPA) for 1 min Brush with clean Alcohol after | 5min |
OD01 | Ultrasonic with clean Alcohol(IPA) for 1 min | 10min |
DC12 | Ultrasonic with clean Alcohol(IPA) for 1 min | 10min |
GM11 | Ultrasonic with clean Alcohol(IPA) for 1 min Brush with clean Alcohol after | 5min |